EV News

China’s CATL reportedly promises solid state battery with high energy density

Published by
Joshua S. Hill

Chinese battery maker CATL has reportedly promised to bring solid-state battery cells with battery density of more than 350Wh/kg, once key technology and production issues have been solved.

Twitter user “Moneyball”, who describes themselves as a “China web media researcher”, recently tweeted that “China media”, citing Chinese battery maker Contemporary Amperex Technology Co. Limited (CATL), had promised solid-state batteries as part of their long-term plans.

More importantly, however, was that CATL reportedly is promising solid-state batteries with battery density of 200Wh/kg, even 230Wh/kg in the near-term, and as much as 350Wh/kg and 400Wh/kg in the long term.

CATL has made no official announcement of these promises on either their Chinese-language or English-language websites, so we should take this news with a grain of salt. That being said, Moneyball has been proven right in the past, so maybe two grains of salt?

According to Moneyball, lithium-iron phosphate (LFP) is the preferred solid-state battery technology which will help to deliver battery density of 200Wh/kg and even up to 230Wh/kg. CATL is further planning to use the NMC 811 cathode technology (a cathode composition with 80% nickel, 10% manganese, and 10% cobalt) to deliver solid-state batteries with battery density of 300Wh/kg.

In the long term, the company is looking even further, and expects to begin making batteries with battery density of 350Wh/kg, and even up to 400Wh/kg. However, CATL explained that these long-term goals will require solving of key technology and production issues.

Worth noting is that Chinese EV maker Nio announced at the beginning of the year that its new 150kWh battery packs boasted an ultra-high density of 360Wh/kg. Meanwhile, Tesla founder Elon Musk hinted in the middle of last year that 400Wh/kg batteries could be produced in volume in “3 to 4 years.”

CATL’s reported promises also included plans to begin installing cell-to-chassis (CTC) technology in EVs around 2025, which the company hopes will make EVs cost-competitive with traditional ICE vehicles and enable driving ranges in excess of 800-kilometres.

In the near-term, CATL will introduce its second-generation cell-to-pack technology in 2022-2023, and smart cell-to-chassis technology in 2028.

Recent Posts

Used Tesla Model 3 stock nearly at an all-time high

Used Tesla Model 3 stock across Australia rises as more buyers make the switch to…

March 28, 2024

RIP Volvo diesel cars: Last XC90 diesel rolls off production line

The last diesel-fuelled Volvo has rolled off the production line. Diesel cars accounted for most…

March 28, 2024

Genesis unveils electric SUV concept with swivel seats and no B-pillars

Luxury vehicle brand owned by Hyundai unveils two new concept vehicles, a first full-size electric…

March 28, 2024

Boys and their Tonka trucks: How fossil car companies sell highly polluting vehicles

Toxic marketing has caused Australia to become obsessed with overseas 4WDs, SUVs and overpowered utes?…

March 28, 2024

Will we make it? Canberra to the coast and back in a very short range Nissan Leaf EV

A new fast charger in Braidwood makes it possible to go from Canberra to the…

March 27, 2024

EVs are clearly less polluting than petrol cars, even when their grids are dirty

New research has again demonstrated that EVs have lower lifecycle emissions than internal combustion engine…

March 27, 2024